Garmin EDGE 1030 PLUS, Руководство пользователя

Страница: 72 / 95

Cadence Bars: A bar graph showing your current, average, and maximum cycling cadence values for the current
activity.
Cadence Graph: A line graph showing your cycling cadence values for the current activity.
Calories: The amount of total calories burned.
Calories to Go: During a workout, the remaining calories when you are using a calorie target.
Course Pt. Distance: The remaining distance to the next point on the course.
Destination Location: The last point on the route or course.
Di2 Battery Level: The remaining battery power of a Di2 sensor.
Di2 Shift Mode: The current shift mode of a Di2 sensor.
Distance: The distance traveled for the current track or activity.
Distance Ahead: The distance ahead or behind the Virtual Partner.
Distance to Destination: The remaining distance to the final destination. You must be navigating for this data to
appear.
Distance to Go: During a workout or course, the remaining distance when you are using a distance target.
Distance to Next: The remaining distance to the next waypoint on the route. You must be navigating for this
data to appear.
Duration: The time remaining for the current workout step.
eBike Battery: The remaining battery power of an eBike.
Elapsed Time: The total time recorded. For example, if you start the timer and run for 10 minutes, then stop the
timer for 5 minutes, then start the timer and run for 20 minutes, your elapsed time is 35 minutes.
Elevation: The altitude of your current location above or below sea level.
Elevation Graph: A line graph showing your current elevation, total ascent, and total descent for the current
activity.
EPOC: The amount of excess post-exercise oxygen consumption (EPOC) for the current activity. EPOC indicates
the strenuousness of your workout.
ETA at Destination: The estimated time of day when you will reach the final destination (adjusted to the local
time of the destination). You must be navigating for this data to appear.
ETA at Next: The estimated time of day when you will reach the next waypoint on the route (adjusted to the local
time of the waypoint). You must be navigating for this data to appear.
Flow: The measurement of how consistently you maintain speed and smoothness through turns in the current
activity.
Front Gear: The front bike gear from a gear position sensor.
Gear Battery: The battery status of a gear position sensor.
Gear Combo: The current gear combination from a gear position sensor.
Gear Ratio: The number of teeth on the front and rear bike gears, as detected by a gear position sensor.
Gears: The front and rear bike gears from a gear position sensor.
GPS Signal Strength: The strength of the GPS satellite signal.
Grade: The calculation of rise (elevation) over run (distance). For example, if for every 3 m (10 ft.) you climb you
travel 60 m (200 ft.), the grade is 5%.
Grit: The measurement of difficulty for the current activity based on elevation, gradient, and rapid changes in
direction.
Heading: The direction you are moving.
Heart Rate: Your heart rate in beats per minute (bpm). Your device must be connected to a compatible heart
rate monitor.
Heart Rate Bars: A bar graph showing your current, average, and maximum heart rate values for the current
activity.
Heart Rate Graph: A line graph showing your current, average, and maximum heart rate values for the current
activity.
Appendix 65