Garmin EDGE 1030 PLUS, Руководство пользователя

Страница: 16 / 95

Training
Going for a Ride
If you are using a wireless sensor or accessory, it can be paired and activated during initial setup ( Pairing Your
Wireless Sensors, page 42 ). If your device was packaged with a wireless sensor, they are already paired and
can be activated during initial setup.
1 Hold
to turn on the device.
2 Go outside, and wait while the device locates satellites.
The satellite bars turn green when the device is ready.
3 From the home screen, select or to select an activity profile.
4 Select .
5 Select
to start the activity timer.
NOTE: History is recorded only while the activity timer is running.
6 Swipe left or right to view additional data screens.
You can swipe down from the top of the data screens to view the widgets.
7 If necessary, tap the screen to view status overlay data (including battery life) or return to the home screen.
8 Select
to stop the activity timer.
TIP: Before you save this ride and share it on your Garmin Connect account, you can change the ride type.
Accurate ride type data is important for creating bike friendly courses.
9 Select Save Ride.
10 Select
.
Racing a Previous Activity
You can race a previously recorded or downloaded activity.
1 Select Training > Race an Activity.
2 Select an option:
• Select Ride History to select a previously recorded activity from your device.
• Select Saved Courses to select an activity you downloaded from your Garmin Connect account.
3 Select the activity.
4 Select Ride.
5 Select
to start the activity timer.
Training 9