Garmin ECHOMAP UHD2 5 Series Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 76

background image

Chart Settings

NOTE: Not all settings apply to all charts and 3D chart views. Some settings require external accessories or
applicable premium charts.
From a chart, select MENU > Settings.
Map Orientation: Sets the perspective of the map.
Look Ahead: Shifts your present location toward the bottom of the screen automatically as your speed

increases. Enter your top speed for the best results.

Vessel Orientation: Sets the alignment of the vessel icon on the map. The Auto option aligns the vessel icon

using GPS COG at high speeds and the magnetic heading at low speeds to better align the vessel icon with
the active track line. The Heading option aligns the vessel icon with the magnetic heading. The GPS Heading
(COG) option aligns the vessel icon using GPS COG. If the selected data source is not available, the available
data source is used instead.

WARNING

The vessel orientation setting is for informational purposes and is not intended to be precisely followed.
Always defer to the navaids and conditions on the water to avoid groundings or hazards that could result in
vessel damage, personal injury, or death.

Detail: Adjusts the amount of detail shown on the map, at different zoom levels.
Chart Size: Sets the visible size of the chart.
World Map: Uses either a basic world map or a shaded relief map on the chart. These differences are visible

only when zoomed out too far to see the detailed charts.

Inset Map: Shows a small map centered on your present location.

Fish Eye 3D Settings

NOTE: This feature is available with premium charts, in some areas.
From the Fish Eye 3D chart view, select MENU.
View: Sets the perspective of the 3D chart view.
Tracks: Shows tracks.
Sonar Cone: Shows a cone that indicates the area covered by the transducer.
Fish Symbols: Shows suspended targets.

Supported Maps

To help you have a safe and enjoyable time on the water, Garmin devices only support official maps produced
by Garmin or an approved third party producer.
You can purchase maps from Garmin. If you purchase maps from a seller other than Garmin, investigate the
seller before purchasing. Be extra cautious with online sellers. If you have purchased an unsupported map,
return it to the seller.

Charts and 3D Chart Views

23

«
...
27
28
29
30
31
...
»

Содержание ECHOMAP UHD2 5 Series













































































Отзывы:

Нет отзывов

Похожие инструкции для ECHOMAP UHD2 5 Series

Бренд: RallyTrack Страницы: 3

TripMaker RVND 5510

Бренд: Rand McNally Страницы: 21

Бренд: RAK Страницы: 10

Бренд: Navionics Страницы: 38

Бренд: Navilock Страницы: 36

Бренд: Garmin Страницы: 7

Бренд: Cobra Страницы: 8

Бренд: Thales Страницы: 234

Бренд: INTELINK Страницы: 11

Бренд: APM Страницы: 5

Бренд: XAiOX Страницы: 13

Бренд: Garmin Страницы: 60

GARMIN DRIVESMART 76

Бренд: Garmin Страницы: 64

GMI 10 Digital Marine Instrument Display

Бренд: Garmin Страницы: 48

Бренд: SCRAM Systems Страницы: 40

G6 Farmnavigator

Бренд: AvMap Страницы: 32

Бренд: AvMap Страницы: 102

Бренд: Twin Mask Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды