Garmin DEZL LGV1000, Руководство пользователя

Страница: 32 / 36

The mount does not hold my device in place
while I drive
For the best results, you should keep the vehicle mount clean
and position the device close to the suction cup.
If the device shifts position while you are driving, you should
complete these actions.
• Remove the powered mount from the suction cup arm, and
wipe the ball and socket with a cloth.
Dust and other debris may reduce the friction in the ball and
socket joint and allow the joint to shift while you are driving.
• Rotate the hinged arm toward the suction cup as far as your
windshield angle allows.
Positioning the device closer to the windshield reduces the
effect of jarring and vibration from the road.
My device is not acquiring satellite signals
• Verify the location services feature is enabled ( Enabling or
Disabling Location Services , page 23 ).
• Take your device out of parking garages and away from tall
buildings and trees.
• Remain stationary for several minutes.
The device does not charge in my vehicle
• Check the fuse in the vehicle power cable.
• Verify the vehicle is turned on and is supplying power to the
power outlet.
• Verify the interior temperature of the vehicle is within the
charging temperature range indicated in the specifications.
• In the vehicle fuse box, verify the fuse for the vehicle power
outlet is not broken.
My battery does not stay charged for very
long
• Decrease the screen brightness ( Display Settings , page 23 ).
• Shorten the display timeout ( Display Settings , page 23 ).
• Decrease the volume ( Adjusting Sound and Notification
Volume , page 23 ).
• Turn off the wi-fi radio when it is not in use ( Connecting to a
Wireless Network , page 23 ).
• Put the device in power saving mode when not in use
( Turning the Device On or Off , page 2 ).
• Keep your device away from extreme temperatures.
• Do not leave your device in direct sunlight.
My device does not connect to my phone
• Select Settings > Bluetooth .
The Bluetooth option must be enabled.
• Enable Bluetooth wireless technology on your phone and
bring your phone within 10 m (33 ft.) of the device.
• Verify your phone is compatible.
Go to www.garmin.com/bluetooth for more information.
• Complete the pairing process again.
To repeat the pairing process, you must unpair your phone
and device ( Deleting a Paired Phone , page 14 ), and
complete the pairing process.
Appendix
Backup Cameras
Your device can display the video feed from one or more
connected backup cameras.
Pairing a BC ™ 35 Backup Camera with a Garmin
Navigation Device
You must enable the Wi
‑
Fi setting on your Garmin navigation
device before you can connect to a camera.
The BC 35 wireless backup camera is compatible with some
Garmin navigation devices with Android. Go to garmin.com/bc35
for more information about device compatibility.
You can pair up to four BC 35 wireless backup cameras with
your compatible Garmin navigation device.
1
Update your navigation device to the latest software.
Your device may not support the BC 35 camera without the
latest software. For more information about updating, see the
owner's manual for your navigation device.
2
Turn on the Garmin navigation device, and bring it within 3 m
(10 ft.) of the camera.
3
Select > Tools > Rear View .
4
Select an option:
• If this is the first camera you are connecting to the
navigation device, select Add New Camera .
• If this is an additional camera you are connecting to the
navigation device, select > Choose Camera > Add New
Camera .
5
Follow the on-screen instructions.
NOTE: The pairing code or password is located on the
transmitter or the camera.
After you complete the pairing process with a camera for the first
time, it connects automatically to the Garmin navigation device.
Viewing the Backup Camera
Your device shows video from the connected backup camera in
different ways, depending on how the camera is connected to
power.
1
Select an option to show video:
• If the camera is connected to a reverse lamp
(recommended), place the vehicle into reverse.
The device automatically shows video from the backup
camera.
• If the camera is connected to a steady power source,
select > Tools > Rear View to manually view the
camera.
2
Select an option to resume normal device operation:
• If the camera is connected to a reverse lamp
(recommended), take the vehicle out of reverse.
The device automatically resumes normal operation.
• If the transmitter is connected to a steady power source,
select to manually hide the camera.
Switching Cameras
When multiple backup cameras are transmitting to your device,
you can switch between the views from the cameras.
1
Select > Tools > Rear View .
2 Select > Choose Camera .
3 Select a camera.
The video feed from the camera appears, and the camera
name appears at the top of the screen.
Connecting a Dash Camera to the Powered
Mount
Before you connect a dash camera to the powered mount, you
should mount the dash camera device to your windshield.
You can use the dēzl device mount to power a compatible
Garmin dash camera. This can be useful if you need to connect
the dēzl device and the dash camera to the same power source
in your vehicle.
26 Appendix