Garmin D2 MACH 1 STANDARD, Руководство пользователя

Страница: 14 / 102

5 Start your activity.
6 After you complete your activity, press STOP, and
select Save.
Viewing Your SpO2 Readings in Flight
WARNING
The SpO2 readings are intended for supplemental
information only. Always defer to applicable flight
instruments for primary awareness.
The watch has a wrist-based pulse oximeter to gauge
the saturation of oxygen in your blood (SpO2). During
a flight, the watch automatically takes pulse oximeter
readings more frequently, so you can monitor your SpO2
percentage.
TIP: You can improve the accuracy of your SpO2 readings
by turning on the All Day pulse oximeter mode (
Setting the
Pulse Oximeter Mode, page 54 ).
During a flight, scroll up or down to view the SpO2 data
screen.
Your most recent reading appears as an oxygen
saturation percentage and position on the color gauge.
NOTE: If you are too active for the watch to determine
your oxygen saturation, dashes appear instead of a
percentage. You should remain stationary for up to
30 seconds while the watch reads your blood oxygen
saturation.
Navigating to the Nearest Airport
1 Hold BACK·LAP.
A list of the nearest airports appears.
Nearest airport identifier
Distance to the nearest airport
Bearing and pointer to the nearest airport
Flight condition from the nearest METAR station
2 Select an airport.
3 Select Direct-To.
4 Press START to begin navigation.
Navigating to an Aviation Waypoint by Its Identifier
You can navigate directly to an aviation waypoint by
searching for an alphanumeric identifier.
1 Hold
.
2 Select Search by Ident..
3 Enter all or part of the alphanumeric identifier.
4 Select
.
A list of matching waypoints appears.
5 Select the waypoint.
6 Press START to begin navigation.
Stopping Navigation
Hold MENU, and select Stop Navigation.
Enabling Emergency Mode
WARNING
This feature is only designed for use in the unlikely event
of a full aircraft system failure. Do not use this feature as
a primary means of navigation.
This feature is for informational purposes only and does
not engage your aircraft’s autopilot when activated or
otherwise operate your aircraft. You are still responsible
for the safe and prudent operation of your aircraft.
When activated, this feature provides guidance to the
nearest airport. Such guidance is for informational
purposes only and does not guarantee that the airport
provided is suitable for the landing of your aircraft. You
must still use good piloting judgment in safely operating
and landing your aircraft.
You can activate emergency mode on your watch to see
the direction to your nearest airport and glide information.
1 Hold
until your nearest airport appears.
2 Press UP or DOWN to scroll through other nearby
airports.
3 Press LIGHT to view the airport information.
4 Follow the pointer to the airport.
NOTE: When you are within 10 degrees of the correct
track, the pointer turns green.
5 If necessary, pair your watch with your inReach
®
device
( Using the inReach Remote, page 59 ).
6 Hold START to initiate an SOS rescue with your
inReach device.
The SOS countdown begins, and the inReach device
sends a default message to the Garmin
®
International
Emergency Response Coordination Center (IERCC)
with details about your location.
NOTE: You can use the inReach device to reply to the
IERCC. You can hold START on your watch to cancel
the SOS request. See the owner's manual for your
inReach device for more information.
7 Press BACK to stop the activity.
6 Flying