BMW Motorrad Navigator III Owner’s Manual
37
A
PPENDIX
Technical Specifications
Size
: 5.6” W x 3.2” H x 2.0” D (14.3 x 8.0 x 5.0 cm)
Weight
: 0.93 lb (420 g)
Unit Case
: Rugged; fully gasketed; IPX7 waterproof*
Display
: Sunlight-readable, 17:9 WQVGA automotive color TFT
display with touch screen and auto dimming; 454 pixels by 240
pixels,
Map Storage
: Pre-programmed internal memory
Temperature
: 5° to 158°F (-15° to 70°C)
Power Supply
Source
: 12 VDC
Usage
: 12 watts maximum @ 13.8 VDC
12-volt adapter Fuse
: AGC/3AG - 1.0 Amp
Optional Remote Control
: Two AAA alkaline batteries (not
included).
*
Note
: The remote control is not waterproof.
For a complete list of specifications, visit the Garmin Web site:
http://www.garmin.com/products/navigatorIII/spec.html
Contact your local waste disposal department for information on
properly disposing of the unit.
Changing the Fuse
The Vehicle Navigation Kit cable has a 3AG 1.0 Amp fast blow
fuse located at the tip of the 12-Volt adapter. If you need to change
the fuse, unscrew the black, round end piece and replace the fuse.
Unscrew
Using a Remote GPS Antenna
Use an optional external remote GPS antenna (Garmin GA 25)
when using the unit in a vehicle with a coated windshield or an
in-screen heating system, which can block GPS signals. Connect
the antenna to the MCX connector located on the back of the unit.
To purchase, go to
http://www.garmin.com/products/navigatorIII
Click
Accessories
.