51
AQUAMAP™ 10x2/12x2 SERIES
Press
BACK
to resume.
Sonar Setup
: Adjusts the setup of the transducer and the appearance of the
sonar returns.
Edit Overlays
: Adjusts the data shown on the screen.
LiveVü and FrontVü Sonar Settings
From the LiveVü or FrontVü sonar view, press
MENU
.
Gain
: Controls the level of detail and noise shown on the sonar screen.
If you want to see the highest intensity signal returns on the screen, you
can lower the gain to remove lower intensity returns and noise. If you
want to see all return information, you can increase the gain to see more
information on the screen. This also increases noise, and can make it
more difficult to recognize actual returns.
Range / Depth Range
: Adjusts the range of the depth scale.
Allowing the device to adjust the range automatically keeps the bottom
within the lower portion of the sonar screen, and can be useful for tracking
a bottom that has minimal or moderate terrain changes.
Manually adjusting the range enables you to view a specified range, which
can be useful for tracking a bottom that has large terrain changes, such
as a drop-offs or cliffs. The bottom can appear on the screen as long as it
appears within the range you have set.
Forward Range
: Adjusts the range of the forward scale.
Allowing the device to adjust the range automatically adjusts the forward
scale in relation to the depth.
Manually adjusting the range enables you to view a specified range. The
bottom can appear on the screen as long as it appears within the range
you have set. Manually reducing this option can reduce the effectiveness
of the FrontVü Alarm, reducing your reaction time to low depth readings.
Transmit Angle
: Adjusts the focus of the transducer to the port or starboard
side. This is available only with RealVü capable Panoptix FrontVü
transducers, such as the PS30, PS31, and PS60.
Transmit
: Stops the transducer from transmitting.
FrontVü Alarm
: Sets an alarm to sound when the depth in front of the
vessel is less than the specified value. This is available only with Panoptix
FrontVü transducers.
Sonar Setup
: Adjusts the setup of the transducer and the appearance of the
sonar returns.
Edit Overlays
: Adjusts the data shown on the screen.
Setting the LiveVü and FrontVü Transducer Transmit Angle
This feature is available only with Panoptix LiveVü and FrontVü transducers.
You can change the transducer transmit angle to aim the transducer at a
particular area of interest. For example, you might aim the transducer to
follow a bait ball or focus on a tree as you pass it.
1
From a LiveVü or FrontVü sonar view, select
MENU
>
Transmit Angle
.
2
Select an option.
Setting the FrontVü Depth Alarm
WARNING
The FrontVü depth alarm is a tool for situational awareness only, and may
not prevent groundings in all circumstances. It is the obligation of the vessel
operator to ensure safe operation of the vessel.
This alarm is available only with Panoptix FrontVü transducers.
You can set an alarm to sound when the depth is below a specified level.
For best results, you should set the bow offset when using the front collision
Содержание AQUAMAP 10x2 Series
Страница 1: ...AQUAMAP 10x2 12x2 SERIES Owner s Manual...
Страница 111: ...101 AQUAMAP 10x2 12x2 SERIES...
Страница 112: ...support Garmin com Printed in Taiwan October 2017 190 02217 00_0A...