Garmin AQUAMAP 10x2 Series Скачать руководство пользователя

Страница: 29 / 112

AQUAMAP™ 10x2/12x2 SERIES

Survey Coloring

: Sets the color of the Garmin Quickdraw Contours display.

When this setting is turned on, the colors indicate the quality of the

recording. When this setting is turned off, the contour areas use standard

map colors.

Green indicates good depth and GPS position, and a speed under 16

km/h (10 mph). Yellow indicates good depth and GPS position, and a

speed between 16 and 32 km/h (10 and 20 mph). Red indicates poor

depth or GPS position, and a speed above 32 km/h (20 mph).

Depth Shading

: Specifies the upper and lower limits of a depth range and a

color for that depth range.

Navigation with AQUAMAP

CAUTION

If your vessel has an autopilot system, a dedicated autopilot control display

must be installed at each steering helm in order to disable the autopilot

system.
The Auto Guidance feature is based on electronic chart information. That

data does not ensure obstacle and bottom clearance. Carefully compare

the course to all visual sightings, and avoid any land, shallow water, or other

obstacles that may be in your path.
When using Go To, a direct course and a corrected course may pass over

land or shallow water. Use visual sightings, and steer to avoid land, shallow

water, and other dangerous objects.

NOTE:

Some chart views are available with premium charts, in some areas.

To navigate, you must choose a destination, set a course or create a route,

and follow the course or route. You can follow the course or the route on the

Nav. chart, Fishing chart, or 3D chart view.
You can set and follow a course to a destination using one of three methods:

Go To

: Takes you directly to the destination. This is the standard option for

navigating to a destination. The AQUAMAP creates a straight-line course

or navigation line to the destination. The path may run over land and other

obstacles.

Route To

: Creates a route from your location to a destination, allowing you

to add turns along the way. This option provides a straight-line course to

the destination, but allows you to add turns into the route to avoid land and

other obstacles.

Auto Guidance

: Uses the specified information about your vessel and chart

data to determine the best path to your destination. This option is available

only when using a compatible premium chart in a compatible AQUAMAP.

It provides a turn-by-turn navigation path to the destination, avoiding land

Содержание AQUAMAP 10x2 Series

















































































































Результаты поиска

Содержание AQUAMAP 10x2 Series

Отзывы:

Похожие инструкции для AQUAMAP 10x2 Series

Бренды по названию

Популярные бренды

Garmin AQUAMAP 10x2 Series, Руководство пользователя

Результаты поиска

Содержание AQUAMAP 10x2 Series

Отзывы:

Похожие инструкции для AQUAMAP 10x2 Series

Бренды по названию

Популярные бренды