Garmin AQUAMAP 10x2 Series Скачать руководство пользователя

Страница: 22 / 112

AQUAMAP™ 10x2/12x2 SERIES

course line does not appear. Changes in the speed, course over ground, or

rate of turn information transmitted by the vessel can impact the calculation of

the projected course line.
When course over ground, heading, and rate of turn information are provided

by an activated AIS target, the projected course of the target is calculated

based on the course over ground and the rate of turn information. The

direction in which the target is turning, which is also based on the rate of turn

information, is indicated by the direction of the barb at the end of the heading

line. The length of the barb does not change.

When course over ground and heading information are provided by an

activated AIS target, but rate of turn information is not provided, the

projected course of the target is calculated based on the course over ground

information.

Showing AIS and MARPA Vessels

Before you can show AIS vessels on a chart, you must have an external AIS

device and active transponder signals from other vessels. Mini Automatic

Radar Plotting Aid (MARPA) functionality works with radar.

You can configure how other vessels appear on a chart or on a 3D chart view.

The display range and MARPA settings configured for one chart or one 3D

chart view are applied only to that chart or to that 3D chart view. The details,

projected heading, and trails settings configured for one chart or one 3D chart

view are applied to all charts and to all 3D chart views.

From a chart or a 3D chart view, select

MENU

Other Vessels

Display

Setup

Select an option:

• To indicate the distance from your location in which AIS vessels appear,

select

Display Range

, and select a distance.

• To show MARPA-tagged vessels, select

MARPA

Show

• To show details about AIS-activated and MARPA- tagged vessels,

select

MARPA

Show

• To set the projected heading time for AIS-activated and MARPA-tagged

vessels, select

Proj. Heading

, and enter the time.

• To show the tracks of AIS vessels, and the length of the track using a

trail, select

Trails

, and select the length.

Activating a Target for an AIS Vessel

From a chart or a 3D chart view, select an AIS vessel.

Select

AIS Vessel

Activate Target

Viewing Information about a Targeted AIS Vessel

You can view the AIS signal status, MMSI, GPS speed, GPS heading, and

other information that is reported about a targeted AIS vessel.

From a chart or a 3D chart view, select an AIS vessel.

Select

AIS Vessel

Deactivating a Target for an AIS Vessel
1

From a chart or a 3D chart view, select an AIS vessel.

Select

AIS Vessel

Deactivate

Viewing a List of AIS and MARPA Threats

From a chart or a 3D chart view, select

MENU

Other Vessels

List

Show

Select the type of threats to include in the list.

AIS Distress Signals

Self-contained AIS distress signal devices transmit emergency position

reports when activated. The AQUAMAP can receive signals from Search and

Содержание AQUAMAP 10x2 Series

















































































































Результаты поиска

Содержание AQUAMAP 10x2 Series

Отзывы:

Похожие инструкции для AQUAMAP 10x2 Series

Бренды по названию

Популярные бренды

Garmin AQUAMAP 10x2 Series, Руководство пользователя

Результаты поиска

Содержание AQUAMAP 10x2 Series

Отзывы:

Похожие инструкции для AQUAMAP 10x2 Series

Бренды по названию

Популярные бренды