Garmin AQUAMAP 10x2 Series Скачать руководство пользователя

Страница: 106 / 112

AQUAMAP™ 10x2/12x2 SERIES

bitmap (.bmp) file. You can transfer the screenshot to your computer. You can

also view the screenshot in the image viewer.

Capturing Screenshots

Insert a memory card into the card slot.

Select

Settings

Preferences

Screenshot Capture

Go to a screen you want to capture.

Hold

HOME

for at least six seconds.

Copying Screenshots to a Computer

Remove the memory card from the AQUAMAP, and insert it into a card

reader that is attached to a computer.

From Windows Explorer, open the Garmin\scrn folder on the memory

card.

Copy a .bmp file from the card and paste it to any location on the

computer.

Troubleshooting

My device will not acquire GPS signals

If the device is not acquiring satellite signals, there could be a few causes.

If the device has moved a large distance since the last time it has acquired

satellites or has been turned off for longer than a few weeks or months, the

device may not be able to acquire the satellites correctly.

• Ensure the device is using the latest software. If not, update the device

software.

• Make sure the device has a clear view of the sky so the antenna can

receive the GPS signal. If it is mounted inside of a cabin, it should be close

to a window so it can receive the GPS signal.

My device will not turn on or keeps turning off

Devices erratically turning off or not turning on could indicate an issue

with the power supplied to the device. Check these items to attempt to

troubleshoot the cause of the power issue.

• Make sure the power source is generating power.

You can check this several ways. For example, you can check whether

other devices powered by the source are functioning.

• Check the fuse in the power cable.

The fuse should be located in a holder that is part of the red wire of the

power cable. Check that the proper size fuse is installed. Refer to the label

on the cable or the installation instructions for the exact fuse size needed.

Check the fuse to make sure there is still a connection inside of the fuse.

You can test the fuse using a multimeter. If the fuse is good, the multimeter

reads 0 ohm.

• Check to make sure the device is receiving is at least 10 V, but 12 V is

recommended.

To check the voltage, measure the female power and ground sockets of

the power cable for DC voltage. If the voltage is less than 10 V, the device

will not turn on.

• If the device is receiving enough power but does not turn on, contact

Garmin product support at

support.Garmin.com

My device is not creating waypoints in the correct location

You can manually enter a waypoint location to transfer and share data

from one device to the next. If you have manually entered a waypoint using

coordinates, and the location of the point does not appear where the point

should be, the map datum and position format of the device may not match

the map datum and position format originally used to mark the waypoint.
Position format is the way in which the GPS receiver’s position appears on

the screen. This is commonly displayed as latitude/longitude in degrees and

minutes, with options for degrees, minutes and second, degrees only, or one

Содержание AQUAMAP 10x2 Series

















































































































Результаты поиска

Содержание AQUAMAP 10x2 Series

Отзывы:

Похожие инструкции для AQUAMAP 10x2 Series

Бренды по названию

Популярные бренды

Garmin AQUAMAP 10x2 Series, Руководство пользователя

Результаты поиска

Содержание AQUAMAP 10x2 Series

Отзывы:

Похожие инструкции для AQUAMAP 10x2 Series

Бренды по названию

Популярные бренды