Garmin ALPHA 100F, Руководство пользователя

Страница: 5 / 26

Getting Started
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Setting Up the Alpha 100F System
NOTICE
Avoid using a high-powered radio (greater than 5 watts) in close
proximity to the device. It may cause irreversible damage to the
device.
Before you can use the Alpha 100F handheld device and the
TT15F dog collar device, you must set up the devices.
1
Install the battery in the handheld device ( Installing the
Battery Pack , page 1 ).
2
Charge the handheld device ( Charging the Handheld Device ,
page 1 ).
3
Charge the dog collar device ( Charging the Dog Collar
Device , page 2 ).
4
Turn on the devices ( Turning On the Devices , page 2 ).
5
If necessary, add the dog collar device to the handheld
device ( Adding a Dog to the Alpha 100F Handheld Using
Wireless Pairing , page 3 ).
6
Acquire satellite signals ( Acquiring Satellite Signals ,
page 2 ).
7
Attach the collar ( Fitting the Collar on Your Dog , page 4 ).
Device Overviews
Alpha 100F Handheld Device
GPS antenna
VHF radio antenna
Training keys
Power key
Mounting spine
microSD
™
memory card slot (under battery)
Battery cover D-ring
Mini-USB port (under weather cap)
Dog Collar Device
NOTE: Your dog collar device may look different than the device
pictured.
VHF antenna
GPS antenna
Power key
Contact points
Status LED and flashing beacon LEDs
Registering Your Device
Help us better support you by completing our online registration
today.
• Go to
garmin.com/express .
• Keep the original sales receipt, or a photocopy, in a safe
place.
Installing the Battery Pack
1
Turn the D-ring counter-clockwise, and pull up to remove the
cover.
2 Locate the metal contacts on the end of the lithium-ion
battery.
3
Insert the battery into the compartment, contacts first.
4
Press the battery into place.
5
Replace the battery cover, and turn the D-ring clockwise.
Charging the Handheld Device
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather
cap, and the surrounding area before charging or connecting to
a computer.
You should fully charge the battery before you use the device for
the first time. Charging a fully depleted battery takes about 2
hours.
NOTE: The device does not charge when it is outside the
temperature range of 0° to 40°C (32° to 104°F).
1 Lift the weather cap .
Getting Started 1