Garland MWE1S Скачать руководство пользователя страница 40

Страница: 40 / 94

INSTALLATION/OPERATION & SERVICE MANUAL - 1&2 PLATEN

GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION

PART #4527466 (12 Aug 2011)

Page 40

CONTROL PROGRAMMING

Programming Modes; System Setup

To Change the Temperature Display Units
(Fahrenheit / Celcius)

The temperature display units (F or C) will change
the way a temperature is displayed on the controller
(F – Fahrenheit, C – Celcius)

1. With the controller display ON and either displaying

the current menu item or displaying “OFF”, PRESS and
HOLD the

button for approximately 3 seconds.

Controller will display previously selected menu item
and its corresponding item number OR “Standby /
Menu Item”.

2. PRESS

the AND

arrow buttons TOGETHER.

“CONFIGURE” will appear in the display.

3. PRESS

the arrow button. “Setup” will appear in the

display

4. PRESS

the button. “Temperature Unit” will appear in

the display.

5. PRESS

the button. The currently set temperature

unit will fl ash.

6. PRESS

the OR

arrow buttons to change the

fl ashing temperature unit.

7. PRESS

the button to save the new setting.

8. PRESS

THE 2X to exit the program mode.

To Change the Time Display Units

Changing the Time Display Units will change the way
timing cycles are displayed on the controller.

1. With the controller display ON and either displaying

the current menu item or displaying “OFF”, PRESS and
HOLD the

button for approximately 3 seconds.

Controller will display previously selected menu item
and its corresponding item number OR “Standby /
Menu Item”.

2. PRESS

the AND

arrow buttons TOGETHER.

“CONFIGURE” will appear in the display.

3. PRESS

the arrow button. “Setup” will appear in the

display.

4. PRESS

the button. “Temperature Unit” will appear in

the display.

5. PRESS

the 1X. “Time Unit” will appear in the display.

6. PRESS

the button. The current time unit will fl ash.

7. PRESS

the OR

arrow buttons to change the

fl ashing time unit.

For a complete listing of setup functions and their

options, see section titled “FUNCTION OPTIONS;
SYSTEM MENUS”.

8. PRESS

the button to save the new setting

9. PRESS

THE 2X to exit the program mode.

To change the Key Chirp (Yes / No)

Changing the Key Chirp On or Off will either turn on or off
the sound of the controller when a button is pressed.

1. With the controller display ON and either displaying

the current menu item or displaying “OFF”, PRESS and
HOLD the

button for approximately 3 seconds.

Controller will display previously selected menu item
and its corresponding item number OR “Standby /
Menu Item”.

2. PRESS

the AND

arrow buttons TOGETHER.

“CONFIGURE” will appear in the display.

3. PRESS

the arrow button. “Setup” will appear in the

display

4. PRESS

the button. “Temperature Unit” will appear in

the display.

5. PRESS

the repeatedly until “Key Chirp” appears in the

display.

6. PRESS

the button. The currently set Key Chirp will

fl ash.

7. PRESS

the OR

arrow buttons to change the

fl ashing “YES” or “NO”

8. PRESS

the button to save the new setting.

9. PRESS

THE 2X to exit the program mode.

To change the Audible

Changing the Audible Sound will change the way the
controller sounds when a timing cycle has completed its
countdown.

1. With the controller display ON and either displaying

the current menu item or displaying “OFF”, PRESS and
HOLD the

button for approximately 3 seconds.

Controller will display previously selected menu item
and its corresponding item number OR “Standby /
Menu Item”.

2. PRESS

the AND

arrow buttons TOGETHER.

“CONFIGURE” will appear in the display.

3. PRESS

the arrow button. “Setup” will appear in the

display

4. PRESS

the button. “Temperature Unit” will appear in

the display.

5. PRESS

the repeatedly until “Audible” appears in the

display.

Содержание MWE1S































































































Результаты поиска

Содержание MWE1S

Отзывы:

Garland MWE1S, Инструкция по установке, эксплуатации и обслуживанию, Страница: 40 / 94

Результаты поиска

Содержание MWE1S

Отзывы: