SERVICE MANUAL
GARLAND ELECTIC CLAMSHELL BROILER, CXBE12 MODEL
Part #4532096 Rev 1 (26 June 2013)
Page 12
ELECTRICAL CONNECTION
DISCONNECT THE POWER SUPPLY BEFORE SERVICING.
HIGH
VOLTAGE
IMPORTANT:
The appliance must be electrically
grounded in accordance with local codes, or in
the absence of local codes, with the National
Electrical Code ANSI/NFPA70, or the Canadian
Electrical Code CSA C22.2, as applicable.
Electrical Grounding Instructions
The appliance is equipped with a standard
Nema 15-50 three prong (grounding) plug with
appropriate strain relief for your protection
against shock hazard and should be plugged
directly into a properly grounded three prong
receptacle.
Do not
cut or remove the grounding
prong from this plug.
Important Electrical Precautions
Never touch anything that runs on electricity
when your hands are wet.
It is recommended to allow enough slack on the
electrical cord to allow the appliance to be pulled
out for proper cleaning and maintenance.
DO NOT
USE AN EXTENSION CORD TO CONNECT
THIS UNIT TO A POWER SUPPLY.
DO NOT
USE THIS APPLIANCE IF THE POWER
CORD IS DAMAGED.
DO NOT
ATEMPT TO REPAIR A DAMAGED POWER
CORD. DO NOT EXPOSE THE POWER CORD TO
HEAT OR SHARP EDGES.
DO NOT
OPERATE BROILER IF THE CORD HAS
BEEN PINCHED OR HAS BEEN DAMEGED AS A
RESULT OF RUBBING ON SHARP EDGES.
