Gardner Denver 9CDL R Series, Список запасных частей и руководство по эксплуатации и обслуживанию

Страница: 24 / 52

37-1-615 Page 23
SECTION 4
MAINTENANCE
GENERAL – Blower efficiency and life depend on the quality of maintenance the blower receives.
Maintenance must be done regularly and with care. Clean work space, tools, solvents, and wiping rags
are necessary to avoid transferring dirt into the unit. A maintenance chart listing each blower is a
valuable tool for scheduling regular checks of each unit. A good program, well carried out, will insure long
trouble-free service from the blower.
LUBRICATION
Gears and bearings are splash lubricated. The discharge end sump requires 5-1/2 quarts and the gear
end sump requires 5-1/2 quarts of oil. Filling with this amount of oil will bring the oil level to about the
middle of the sight gauge. Add more oil if necessary to bring the level to the middle. DO NOT OPERATE
THE BLOWER UNLESS OIL LEVEL IS AT THE MIDDLE OF THE SIGHT GAUGE. Do not overfill. Oil is
added through the oil fill hole at the top of each bearing carrier.
RECOMMENDED LUBRICANT
AEON PD Synthetic Blower Lubricant is recommended. Refer to FIGURE 4-1, for AEON PD,
AEON PD
– FG (Food Grade) and AEON PD – XD (Extreme Duty) part numbers.
AEON PD is formulated especially for positive displacement blower service to provide maximum blower
protection at most temperatures. Refer to FIGURE 4-2. One filling of AEON PD will last a minimum of 4
times longer than a premium mineral oil, depending on actual operating conditions. Order AEON PD from
your Gardner Denver distributor or call Gardner Denver directly.
Convenient
Package Sizes
AEON PD
Part No.
AEON PD-FG
Part No.
AEON PD-XD
Part No.
1 quart 28G23 25H97 28G46
Case
12 quarts
28G24 28H98 28G47
1 gallon 28G40 28H333 28G42
Case
6 gallons
28G41 28H334 28G43
5 gallon pail 28G25 38H99 28G44
55 gallon drum 28G28 28H100 28G45
FIGURE 4-1 – AEON PD SYNTHETIC LUBRICANT