EN © 2020 GARDERNIC
–
All Rights Reserved
2-in-1 verticutter and aerator 1500W
30
NETWORK CONNECTION
The device can be powered by single-phase 230-240V~ 50Hz. This is a Class II safety
device, which means that it can be operated after connecting to sockets without a
safety cable.
Before connecting the unit to the mains, check that the mains voltage
corresponds to the operating voltage on the unit's nameplate.
OPERATION OF THE DEVICE
WARNING! Never open the outlet flap (9) while the engine is running. A
rotating cutting unit can cause injury. Always close the outlet flap
carefully. The flap returns to the "closed" position thanks to tension
springs. Always make sure that there is a safe distance between the user and the
device (provided by the long handle of the device).
WARNING! Before removing the basket, make sure that the engine is not
running and the verticutter or aerator rollers mounted in the unit does
not rotate.
Remember to empty the grass basket regularly in order to keep work efficient.
To remove the basket, lift the outlet flap with one hand and pull up the basket handle
with the other.
The operator should wear hearing protection and safety glasses when using
the device. They are not part of the set.
Before starting work, check the technical condition of the device and its
accessories, and check them for operational safety.
If the device is not in
perfect technical condition, it cannot be put into use. If the unit is damaged,
it must be repaired before it can be used again.
To prevent accidental operation, the handle is equipped with a safety lock (2),
a button which must be pressed before pressing the switch (1). If the
activating lever is released, the device switches off. Repeat this several times before
work to ensure that the device is working properly.
The working depth of the device is set by means of an adjustment mechanism. Pull
the working depth adjustment lever (8) upwards, then move it to the desired position.
After setting the lever, make sure it latches properly and cannot be moved
accidentally. The device offers four adjustment levels:
1.
12 mm depth
2.
8 mm depth
3.
4 mm depth
4.
driving / transport position
