UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: GCS-2000S
16
5 cuts. This is normal during the break-in period, and the interval
between future adjustments will lengthen quickly (Fig. 5).
Caution! If a chain is too loose or too tight, the bar
chain and saw bearings will wear more rapidly. Study
Fig. 5 for information concerning correct cold tension
(A), correct warm tension (B), and as a guide for when
saw chain needs adjustment (C).
Caution! If the chain is too loose, with a gap of more
than 3 mm between chain and bar when pushed with a
finger, as shown in Fig. 5. It needs to be adjusted to
ensure safety