UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: GCS-2000S
17
To adjust saw chain tension:
1. To adjust the chain is simple easy, turn the knob (B) clock
wise. To loosen the chain just turn counter clock. (Fig. 6)
2. After adjustment and while wearing heavy duty work gloves,
move the saw chain back and forth on the guide bar to be
sure the chain moves freely and is in proper alignment with
sprocket.
note:
If the chain is difficult to rotate or if it catches on the guide
bar, too much tension has been applied and must be adjusted. To
decrease tension, turn the adjustment screw anticlockwise slowly.
Move the chain back and forth until it moves freely.
3. Holding the nose in upper position, securely tighten the bar
retaining nuts (70 inch lbs./ 8 Nm.)
filling oil tank
Using a funnel, fill oil tank with the blade lubrication oil provided.
Wipe up any spills. Make sure no dirt gets into the oil tank. The
saw chain requires lubrication while in use to minimize friction
with the guide bar. The oil tank holds 200ml of oil, enough to
lubricate the chain for 30 minutes of sawing. We recommend
using special chainsaw oil, which contains additives to reduce
friction wear, reduce resin residue formations and is
biodegradable.