UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: GCS-2000S
21
Hook the loop formed by doubling the cords over the tab.
Gently tug on the cord to ensure that it is firmly retained in
the saws handle. Plug the receptacle end of the extension
cord into the tool’s power supply cord. (Fig. 8b)
3. Grip the saw with both hands, left hand holding the front /
handle (do not hold chain brake) and the right
hand holding the rear handle. Thumbs and fingers should
encircle both handles (Fig. 8c).
4. With your Right thumb, push the Lock/Off button (C) forward
at end the top of the rear handle, and at the same time
squeeze the trigger. To stop the saw, release the trigger (Fig.
8d).
note:
It is not necessary to maintain pressure on the Lock/Off
button once the trigger is squeezed and the motor is running.
The lock / off button is a safety device to avoid accidental
starting.
soft start
The machine is fitted with a soft start mechanism. Wait until the
machine has reached full speed before use.
To stop the motor
The saw motor will automatically stop when the trigger is
released. The lock/ off button will have to be depressed and the
trigger squeezed to restart the motor.