2. ASSEMBLY
1
3
2
The Pruner, chain, bar, protective cover complete with Allen key and
the operation instructions are included in the scope of delivery.
DANGER! Risk of physical injury!
Cut injury when the unit starts accidentally.
v
Before you assemble the unit, make sure that the mains
cable is disconnected and the protective cover
1
is slid
over the bar
2
and the snap fit
3
is closed.
To assemble the telescopic
handle:
4
6
M
ß
6
5
M
ß
4
1. Slide the telescopic pipe
4
into the motor unit
5
until you reach
the stop position. Ensure that the two markings
ß
M
face each
other.
2. Tighten the grey nut
6
.
To assemble the shoulder
strap:
9
7
8
CAUTION!
The supplied shoulder strap must be used.
1. Widen the belt clip
7
and fasten it onto the beam using the
screw
8
.
2. Engage the shoulder strap clasp
9
to the belt clip
7
.
3. Adjust the shoulder strap to the desired length by using the
quick strap fastener.
3. INSTALLATION
Initial Operation:
1
3
2
DANGER! Risk of physical injury!
Cut injury when the unit starts accidentally.
v
Before you initially operate the unit, make sure that the
mains cable is disconnected and the protective cover
1
is slid over the bar
2
and the snap fit
3
is closed.
6
GB
