To fill in chain oil:
DANGER!
Physical injury due to chain breakage when the chain
on the bar is not sufficiently lubricated.
v
Check whether sufficient quantities of chain oil are
delivered prior to each use.
We recommend to use Art. 6006 GARDENA Oil or an equivalent
mineral chain oil from a specialist supplier.
0
q
w
1. Unscrew the lid of the oil tank
0
.
2. Fill the chain oil into the filler neck
q
until the viewing window
w
is fully filled with oil.
3. Close the lid of the oil tank
0
again.
The unit must be cleaned thoroughly if oil has been spilled.
To check the oil lubrication
system:
v
Point the bar
2
at a bright wood cutting surface at a distance of
approx. 20 cm. After operating the unit for one minute, clear traces
of oil must be visible on the surface.
Never let the bar come into contact with sand or soil as this
will lead to increased wear of the chain.
4. OPERATION
1
3
2
DANGER! Risk of physical injury!
Cut injury when the unit starts accidentally.
v
Before you connect, adjust or transport the unit,
disconnect the mains cable and slide the protective
cover
1
over the bar
2
and close the snap fit
3
.
To connect the pruner:
t
z
r
l
k
DANGER! Risk of electric shock!
To avoid damage to the mains cable
r
the extension
cable
t
must be inserted into the cable lock
z
.
v
Before you operate the unit insert the extension cable
t
into the cable lock
z
.
v
Never take hold of the protective cover
1
when connect-
ing the unit.
1. Loop the extension cable
t
, insert the loop into the cable lock
z
and pull tight.
2. Connect the plug
k
of the unit into the socket
l
of the extension
cable.
3. Connect the extension cable
t
into a 230 V mains socket.
7
GB
