manualshive.com logo in svg

Gardena R38Li, Руководство по установке

Поделиться
Скачать
Gardena R38Li Скачать руководство пользователя страница 67

English - 67

8. MAINTENANCE

8.6 Replacing the blades 

There are three blades on the robotic lawnmower, 
which are screwed into the blade disc. All three 
blades and screws must be replaced at the same 
time to obtain a balanced mowing system.

Use GARDENA approved original blades only. 

To replace the blades:

1.

Set the main switch in position 

0

.

2.

Wear protective gloves.

3.

Turn the robotic lawnmower upside down.

4.

Rotate the skid plate so that its hole aligns with 
the screw for the blade. Applies to the R70Li 
only.

5.

Remove the screw. Use a straight slot or 
cross-tip screwdriver.

6.

Remove the blade and the screw.

7.

Screw on the new blade and the new screw.

8.7 Replacing the battery

The battery is maintenance-free, but has a limited life 
span of 2 to 4 years.

Battery life is dependent on the length of the season 
and how many hours a day the robotic lawnmower is 
used. A long season or many hours of use a day 
means that the battery must be replaced more 
regularly.

WARNING

Always use original blades and 
screws when replacing. Only 
replacing the blades and reusing the 
screw can result in a screw wearing 
during mowing and shearing. The 
blades can then be propelled from 
under the body and cause serious 
injury.

1157069-26,R40Li_GB.book  Page 67  Wednesday, November 19, 2014  5:02 PM

Содержание R38Li





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды