Gardena R38Li Скачать руководство пользователя

Страница: 29 / 84

English - 29

3. INSTALLATION

3.5 Connecting the boundary wire

Connect the boundary wire to the charging station:

Place the wire ends in the connector:

• Open the connector.

• Place the wire in the connector grip.

Press the connectors together using a pair of
pliers. Press until you hear a click.

Cut off any excess boundary wire 1 or 2
centimetres above each connector.

Press the connector onto the metal pin, Press
the connector onto the contact pin, marked AL
(left) and AR (right), on the charging station.

Carefully check that the connector is properly
fitted.

IMPORTANT INFORMATION

The boundary wire must not be crossed when
connecting it to the charging station. The
right hand wire end must be connected to the
right hand pin on the charging station and
the left hand wire end to the left pin.

IMPORTANT INFORMATION

The right hand connector must be connected
to the right hand metal pin on the charging
station and the left hand wire end to the left
connector.

1157069-26,R40Li_GB.book Page 29 Wednesday, November 19, 2014 5:02 PM

Содержание R38Li





















































































Результаты поиска

Содержание R38Li

Отзывы:

Похожие инструкции для R38Li

Бренды по названию

Популярные бренды

Gardena R38Li, Руководство по установке

Результаты поиска

Содержание R38Li

Отзывы:

Похожие инструкции для R38Li

Бренды по названию

Популярные бренды