English - 33
3. INSTALLATION
6.
Connect the guide wire to the boundary wire
using a coupler:
Insert the boundary wire in each of the holes in
the coupler. Insert the guide wire in the centre
hole in the coupler. Check that the wires are fully
inserted into the coupler so that the ends are
visible through the transparent area on the other
side of the coupler.
Use a polygrip to completely press down the
button on the coupler.
It does not matter which holes are used to
connect each wire.
7.
Staple down/bury the connector in the lawn.
IMPORTANT INFORMATION
The guide wire may not cross the boundary
wire, for instance a boundary wire that is laid
out to an island.
IMPORTANT INFORMATION
Test that the guide wire works using the
Calibrate guide
function before using the
robotic lawnmower. See
3.8 First start-up and
calibration
on page 34.
1157069-26,R40Li_GB.book Page 33 Wednesday, November 19, 2014 5:02 PM
Содержание R38Li
Страница 2: ......
