10 - English
1. INTRODUCTION AND SAFETY
Transport
The original packaging should be used when
transporting the robotic lawnmower over long
distances.
To safely move from or within the working area:
1.
Press the
STOP
button to stop the robotic
lawnmower. If security is set to the medium or
high level (see
6.5 Security
on page 53), the PIN
code has to be entered. The PIN code contains
four digits and is selected when you start the
robotic lawnmower for the first time. See
3.8 First
start-up and calibration
on page 34.
2.
Set the main switch in position
0
.
3.
Carry the robotic lawnmower by the handle at the
rear under the robotic lawnmower. Carry the
robotic lawnmower with the blade disc away from
the body.
Maintenance
•
Inspect the robotic lawnmower each week and
replace any damaged or worn parts.
•
Check especially that the blades and blade disc
are not damaged. Check also that the blades can
pivot freely. Replace all blades and screws at the
same time if necessary so that the rotating parts
are kept balanced. See
8.6 Replacing the blades
on page 67.
IMPORTANT INFORMATION
Do not lift the robotic lawnmower when it is
parked in the charging station. This may
damage the charging station and/or the
robotic lawnmower. Open the cover and
instead first pull the robotic lawnmower out
of the charging station before lifting it.
IMPORTANT INFORMATION
Never use a high-pressure washer or even
running water to clean the robotic
lawnmower. Never use solvents for cleaning.
1157069-26,R40Li_GB.book Page 10 Wednesday, November 19, 2014 5:02 PM
Содержание R38Li
Страница 2: ......
