14
GB
Return flow tip :
Start up UVC-pond filter :
10. Connect the UVC outlet
8
to the water intake
D
of the filter
with approx. 50 cm of the hose supplied
L
.
11. Insert UVC bulb and fit UVC unit (see 7. Trouble-Shooting
“ Changing the bulb ”
).
1. Cut the connecting hose
M
between pump and filter to size
accordingly.
2. Screw the adapter
P
(pre-mounted) and connecting nipple
O
on the pump.
3. Push the hose clamp
N
onto the connecting hose
M
.
4. Slide the connecting hose
M
onto the connecting nipple
O
.
5. Secure the connecting hose
M
with the hose clamp
N
.
5. Initial Operation
1. Stand or bury the filter housing
K
in a stable position at least
2 m away next to the garden pond.
The outlet may not be more than 1m above the surface of the
pond.
Set up the UVC-pond filter horizontally so that the filter cannot
overflow.
2. Using the remainder of the hose
M
, connect the pump
Q
to the
UVC intake
7
.
3. Place the pump
Q
in a stable position within the garden pond
so that the pump
Q
are completely covered with water.
4.
Plug the mains plug of the pump
Q
into a 230 V AC socket.
Warning : The pump will start immediately !
5.
Plug the mains plug of the UVC unit
2
nto a 230 V AC socket.
We recommend that you lay the return flow in such a way that the
purified water is reintroduced indirectly e.g. via a short stream.
This enriches the purified water with additional oxygen.
Join the connecting hose
to the pump :
M
N
O
P
2
Q
7
M
K
