10
ASSEMBLY INSTRUCTIONS
C
Hardware Used
Hardware Used
7. Attach Table Assembly (D) to the panels using
M6 x 16 mm bolts (AA).
AA
M6X10
Bolt
X 4
M6 x 16 mm Bolt
AA
8. Insert the Pole (C) into the table assembly and
secure in place with M6 x 10 mm bolts (BB).
Then, feed the Deck Ring (I) over the Pole and
place on the table.
BB
M6X10 mm Bolt
X 4
BB
M6 x 10 mm Bolt
BB
D
C
C
I
D
8
BB
C
D
C
D
I
9
L
F
M
9. From inside the cabinet, secure the left end of
the tank holder (M) into the holder
preassembled on left panel assembly (F).
Then lock the other end of the tank holder (M)
into the holder on right panel assembly (L).
Note:
The tank holder (M) is highly
recommended to be installed as it can prevent
gas tank from shaking.
AA
D
H
F
7
H
F
D
AA
