16
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Burner doesn
’t light. 1. Gas pressure is low.
2. The orifice is blocked.
3.
Control knob is not in “ON”
position.
1. Turn the gas cylinder
valve “OFF”
and replace the cylinder.
2. Clear blockage.
3.
Turn control knob to “ON”
Burner flame is low.
1. Gas pressure is low.
2. The control knob is not
positioned at “High”.
3. The burner jet is partially
blocked.
4. Outdoor temperature is less
than 40°F and/or tank is less
than 1/4 full.
5. Supply hose is bent or kinked.
1. Turn the gas cylinder
valve “OFF”
and replace the cylinder.
2.
Position the control knob at “High”.
3. Clear blockage.
4. Use a full gas cylinder.
5. Straighten the hose.
Carbon buildup.
Seasonal accumulation.
Wipe off before lighting.
Thick black smoke.
Blockage in burner.
Remove blockage and clean burner
inside and outside.
WARRANTY
The appliance has been manufactured under the highest standards of quality and workmanship. We
warrant to the original consumer/purchaser that all aspects of this product will be free of defects in
material and workmanship for one (1) year from the date of purchase. Replacements for any
defective part will be supplied free of charge for installation by the consumer. Defects or damage
caused by the use of other than genuine parts are not covered by this warranty. This warranty shall
be effective from the date of purchase as s
hown in the purchaser’s receipt. This warranty is valid for
the original consumer purchaser only and excludes industrial, commercial or business use of the
product, product damage due to shipment or failure which results from alteration, product abuse or
product misuse, where performed by a container, service company or consumer. We will not be
responsible for labor charges and/or damage incurred in installation, repair or replacement, nor for
incidental or consequential damage. This warranty gives you specific legal rights, and you may also
have the other rights that vary from state to state.