GARDASOFT TR-RT Series, Руководство пользователя

Страница: 24 / 42

TR-RT LED lighting controllers - User Manual
9 Ethernet communication
(TR-RT220, TR-RT420)
You may need to ask your network administrator for advice about setting
up the Ethernet connection.
Ethernet set up is not affected by cold booting the TR-RT.
See Application note APP923 (available from www.gardasoft.com ) for
troubleshooting Ethernet problems.
9.1 Connection
The Ethernet link uses a 10Base-T connection on an RJ45 connector. The
TR-RT is usually connected to a network switch, hub or router, but you can
connect it directly into the network port on a PC using a crossover cable.
9.2 IP Address
The TR-RT needs an IP address to communicate over Ethernet. There are
two ways to get an IP address; either programmed into the unit or using
DHCP.
For DHCP mode, the TR-RT acquires its IP address, subnet mask and
gateway address from a DHCP server. Otherwise the TR-RT has a fixed IP
address, subnet mask and gateway address.
DHCP mode or the IP address can be set and read using the
GardasoftMaint program available at
www.gardasoft.com .
The GardasoftMaint window is shown below:
— 24 —