21
Extended Set Up can be used to set pulsed output as follows.
PP600 is ready
Use UP or
DOWN to
select "PU 1",
"PU 2" or
"PU12"
The PP600 is ready to
pulse the output on a
trigger.
Use UP or DOWN to select
which output channel to set up -
"CH1" or "CH2".
Press and hold RANGE
for one second
Press SELECT
Select "0" for amps or "-3" for milliamps. Then
press SELECT to set the pulsed current. The
RANGE button changes which digit is altered.
Press SELECT
Wait one second
Press SELECT
Wait one second
Press SELECT
Press SELECT
Press SELECT
Wait one second
Use UP or DOWN and RANGE
to set the maximum current
rating of the LED unit. See text.
Select "0" for seconds or "-3" for milliseconds.
Then press SELECT to set the delay.
Press SELECT
Wait one second
Press SELECT
Press SELECT
Set the pulse width in the same way as the delay.
Press SELECT
Wait one second
Press SELECT
Press SELECT
Press SELECT
