3 - INSTRUCTIONS FOR USE
100
000
00
MA
22
TURNING ON AND OFF
When power is supplied, the card displays for several se-
conds the software version.
Then the oven goes to the OFF status and on the time
display the LED is turned on and it stays on hold.
By pressing
ON/OFF
:
you turn the card on;
all the displays turn on;
the temperature display flashes waiting for the the set
point value to be inserted:
- default temperature 100 °C,
- default timer 000,
- default humidity 0,
- default program display
MA
(manual function of the
oven).
When the temperature is set using the
+
or
-
keys, the di-
splay continues to flash for 15 seconds and then accepts
the set value, or, by pressing the temperature key it im-
mediately accepts the set value and the display shows
the set point permanently and the time display flashes
automatically.
When the time is set using the
+
or
-
keys on the display
continues to flash for 15 seconds and then accepts the
set value, or, by pressing the time key it immediately ac-
cepts the set value and the display shows the set time
permanently and the humidity display flashes automa-
tically.
When the humidity value is set using the
+
or
-
key the
display continues to flash for 15 seconds and then accepts
the set value, or, by pressing the humidity key it immedia-
tely accepts the set value.
At this point all the displays are permanent and show the
set values. The programs display remains in the
MA
po-
sition and it does not flash unless the
P
key is pressed in
order to access the programming.
During the cooking cycle, at the stage of variation of the
set parameters, by pressing the relevant key (temperatu-
re, time, humidity) and using the
+
or
-
keys, it is possi-
ble to change the parameters waiting for 15 seconds or
pressing the relevant key and the program does not go
automatically to the following value as in the initial stage.
When you turn the oven off using the
ON/OFF
key or at
the end of the cooking cycle, the set parameters are sto-
red for 5 minutes.
5 minutes after it was turned off the card returns, when
restarted, to the
MA
(manual) operation.
EN
