background image

 

 

 

Genesis Vertical Lift Owners Manual  

       Page 16 

Item#11301-H-OM 

 

Warranty Information 

 

Warranty 

 
Garaventa warrants this lift to be free from defects in materials and workmanship 
under normal use and service for a period of two (2) years from the date of 
installation, reasonable wear and tear excluded. Proof of the date of installation is 
required to determine the warranty period. 
 
The warranty does not extend to any Garaventa Genesis Vertical Lift unit which 
has been subjected to misuse, neglect, accident, modifications or damage from 
fire, lightning or water, or used in violations of the instructions furnished, nor units 
repaired or altered by other than an authorized Garaventa dealer. This warranty 
does not cover service work, oiling, cleaning and minor adjustments that are 
required from time to time. Consult your local authorized Garaventa Lift Dealer. 
 
Garaventa’s liability hereunder is limited to repair and/or replacement only. 
Transportation and labor charges are not covered. Garaventa accepts no liability 
for any loss or damage resulting from use or misuse of the equipment, whether 
such damage is direct, indirect or consequential. All other express or implied 
warranties, statutory or otherwise, are excluded. 
 
 

Warranty Registration 

 
A warranty registration form must be filed with us within ten days of the completion 
of your Garaventa Genesis Lift installation. 
 

Optional Extended Warranty Protection (Canada & USA only) 

 
As an option you are able to purchase extended warranty protection for your 
Garaventa Genesis Vertical Platform lift 

(Preventive Maintenance Agreement

 

required).

 This will extend your warranty from two years to 7 years. (warranty 

details are available). The extended warranty covers all major components. 
 

Important note: 

The extended warranty protection plan (PMA required) is 

available for purchase up to 30 days after lift installation. An extended purchase 
availability of up to 90 days after installation is available for an additional cost. 
 
Protect your investment. Contact your local Garaventa dealer or Garaventa Lift for 
more information.

 

Содержание Genesis 2006



























































Отзывы: