Installation and operating instructions 13
6.
Installation
6.15
E
F
• Fix the floor track (A).
• Mark the drill points.
• Drill through all openings in the guide grooves (E).
• Drill through all the indentations on the sides (F).
• Screw the floor track at all fixing points.
Tip:
For concrete foundations, the following fixing materials are suitable for a particularly secure fixing:
- Fixing points in the guide grooves (E):
Fischer Universal frame fixings Type FUR 10x80 T A4, counter sunk (Torx)
- Fixing points in the indentations (F):
Fischer Universal frame fixings Type FUR 10x80 SS A4, hexagonal head with stainless steel washers
A
A
6.4
Installing the curtain
Attention!
To avoid damage to the door, the following points must apply:
- The screws of the fixing brackets (A) may only be slightly loosened, otherwise the upper track (B) can fall down.
- The brush inlay (D) of the upper track (B) must abut the corner deflection unit (C).
- The door curtain (G) must be protected against scratches.
- All the rollers of the curtain (G) must run in the groove (I).
- The bottom of the curtain (G) must run between the floor track (J) and the wall.
The assembly aid (F) is an optional extra available from Alulux. The assembly aid (F) facilitates the insertion of the
curtain in the corner deflection unit (C).
6.16
B
A
• Mark the exact position of all fixing brackets (A) on the upper
track (B).
• Unscrew the screws on the fixing bracket (A).
www.thegaragedoorcentre.co.uk
0800 525 442
www.thegaragedoorcentre.co.uk
www.thegaragedoorcentre.co.uk
0800 525 442
www.thegaragedoorcentre.co.uk
