Ganz ZC-PT336N-IR, Руководство пользователя

Страница: 22 / 39

White balance functions has 4 modes and may need to be changed depending on the situation.
•
AWB Mode : 3,200
º
K to 6,500
º
K (Default)
•
Indoor : up to 3,200
º
K
•
Outdoor : up to 5,800
º
K
C-6. CAMERA SET - BLC (Back Light Compensation)
From simple ON / OFF setting to user friendly BLC status indication [BLC] status with control of
controller by "FOCUS FAR KEY"(" " signal appeared)
With the control of joystick on controller by LEFT / RIGHT, setting change of [BLC] / [WDR] is
available.
Setting change completed by pressing FOCUS FAR KEY.(" " signal disappeared.) This function
can be recalled by pushing 93+Preset button.
C-7. CAMERA SET - D/N MODE
The dome camera can operate in day / night mode and will switch depending on lighting
conditions. Alternatively it can be forced into color only mode.
The default setting is AUTO MODE. This function can be recalled by pushing 94+Preset button.
C-8. CAMERA SET - DSS MODE (DIGITAL SLOW SHUTTER)
If digital slow shutter is enabled the exposure time of the camera is increased, thus allowing more
light to be collected and improving low light response.
This setting should not be enabled if the dome is touring at night or fast moving objects are likely
to be in the scene as smearing is also increased. The default setting is OFF.
C-9. CAMERA SET - [NEXT PAGE] - HR MODE
Images with a high resolution can be obtained using a newly developed DSP for improved picture
quality. The default setting is OFF.
•
OFF : 530TV Lines
•
ON : 550TV Lines
C-10. CAMERA SET - [NEXT PAGE] - DNR MOED
It enables noise reduction digitally.
It sets the noise reduction rate using LEFT / RIGHT key of CONTROLLER JOYSTICK [OFF, 1˜5].
The default setting is OFF
C-11. CAMERA SET - [NEXT PAGE] - IS MODE
It help to stabilized video image when camera revealed to wind or other environmental reasons.
The default setting is OFF.
OSD Menu Setting
D. Preset Set
D-1. PRESET - PRESET NO
Up to 165 preset positions are available.