６６
Record Setting
Record Setup
You can set the recording options for Auto or Manual mode.
1. From
<RECORD SETUP>
menu, select
<OPERATION MODE>
.
2. Use the
[▲▼
◀▶
]
buttons or use the mouse to set
<RECORD SETUP MODE>
to
<AUTO CONFIGURATION>
or
<MANUAL CONFIGURATION>
.
3. Set the recording options for each selected Record mode.
4. To apply the change, click
<APPLY>
in the bottom of the screen.
5. When done, press the
[EXIT]
button on the remote control or click
<CLOSE>
in the
lower screen. The confirmation message appears and you will return to the previous menu.
Auto Configuration
If you choose your preferred record mode, the NVR will recommend you the optimized
settings for the selected record mode.
>ALWAYS HIGH VIDEO QUALITY : Recording will proceed in the best quality regardless of
the event at all times.
As this option will always make recording in the
best quality, the recording period is the shortest
compared to the other record modes.
>MOTION RECORD : Recording will proceed only
if a motion is detected.
>ALARM RECORD : Recording will proceed only
if an alarm event occurs.
>MOTION/ALARM RECORD : Recording will
proceed only if a motion is detected or an alarm
event occurs.
>INTENSIVE MOTION RECORD : Normally
recording will be performed in a low quality. However, the quality will switch to high if a
motion is detected.
>INTENSIVE ALARM RECORD : Normally recording will be performed in a low quality.
However, the quality will switch to high if an alarm event occurs.
>INTENSIVE MOTION/ALARM RECORD : Normally recording will be performed in a low quality.
However, the quality will switch to high if an alarm event occurs or a motion is detected.
Manual Configuration
If you set the record mode to
<MANUAL CONFIGURATION>
, the manual configuration windo
w will appear where youcan set the manual recording
and panic recording options.
>MANUAL CONFIGURATION OPTIONS : You can
configure the recording settings by the time, date,
and channel.
- SCHEDULE MODE : Set the recording
schedule for a day (daily) or for a week (weekly).
- PRE RECORDING TIME : Set the pre-recording
time.
- POST RECORDING TIME : Set the post
-
recording
time.
>PANIC RECORDING OPTIONS : Set the panic
recording duration. If it is set to <MANUAL CONFIGURATION>, recording will continue until
you turn it off manually.
