４０
System Setting
3. To apply the change, click
<APPLY>
in the
bottom of the screen.
4. When done, press the
[EXIT]
button on
the remote controller or
<Close>
in the lower screen.
Covert Setup
You can set to hide the camera video so that
a specific user or user group can not view.
Set a channel(s) that you want to hide from a
specific user or user group.
1. From
<SYSTEM SETUP>
-
<CAMERA>
,
select
<COVERT SETUP>
.
2. Use the
[▲▼
◀▶
/ENTER]
buttons on the remote
control or use the mouse to select a covert
channel(s) from a specific user group.
>ADMIN, MANAGER, USER : Set them to
<ON>
.
The selected channel will be hidden from the applicable user account.
>LOGOUT : Set it to
<ON>
. When the user logs out, the selected channel will not be
displayed.
3. Select display title on live view screen for covert channel either
“COVERT” or “NO VIDEO”
To activate this settings, user need to logoff then login NVR again.
4. To apply the change, click
<APPLY>
in the bottom of the screen.
5. When done, press the
[EXIT]
button on the remote control or click
<CLOSE>
in the lower screen.
The confirmation message appears and you will return to the previous menu.
To change the covert settings from user group to user, move to the
<USER>
menu and
make necessary changes. (page 46)
Motion Sensor
Set the motion sensor of the camera so that it can
detect a motion event.
1. From
<SYSTEM SETUP>
-
<CAMERA>
,
select
<MOTION SENSOR>
.
2. Use the
[▲▼
◀▶
/ENTER]
buttons on the remote
control or use the mouse to specify the use of
each option item.
> ACTIVATION : turn on or off the motion sensor.
> MOTION MARK: Set it to
<ON>
.
The video window will display the motion mark if a motion is detected.
> SENSITIVITY : Set the sensitivity level of the motion sensor to either Day or Nighttime.
> MINIMUM BLOCKS : Set the minimum number of blocks (that will be considered an
event) to Day or Nighttime if a motion is detected in several blocks in the motion sensor
area.
> AREA SETUP : Specify the motion detection area.
