GL7p - Battery-powered, door-mounted electronic locker lock GL7p
Configuration
www.gantner.com
HB_GL7p--EN_12
43
o
All available firmware versions for the previously selected device component (GL7p main device or the
selected reader type) are displayed here.
► Hover the mouse over the desired version to see the included new features.
► Select the latest update and click on "Next".
► If no firmware versions are displayed, you can also select a locally stored firmware file by clicking on "Select
local update package" and transfer it to the GL7p.
o
The "Device update wizard" downloads the update from the GANTNER server and transfers it to the
GL7p. This usually takes about 1 minute. During the update, the LED on the GL7p flashes green and
red alternately in rapid succession.
► Click on "Finish" when the update process is finished.
5.3 Configuration with the MoLA App
The MoLA app, which is available for download via Google Play Store, can be used with a mobile device, e.g., a
smartphone, to configure the GL7p locks. To use the MoLA app, the following requirements must be fulfilled:
-
Mobile device with Android 4.4.0 or later
-
Mobile device must be NFC enabled
-
Mobile device must not be rooted
-
The GL7p must have firmware version 2.4.0 or higher)
-
A valid APP KEY data carrier is required for configuring on-site locks
The MoLA app can be downloaded with this link from Google Play Store:
https://play.google.com/store/apps/details?id=com.gantner.mola
Due to technical limitations in iOS, the MoLA app is currently not available on Apple devices.
In MoLA you can change the same configuration settings like in GAT Config Manager (see "5.4. Configuration
Settings of the GL7p"). A detailed description about the operation of the app is directly included in MoLA.
The APP KEY data carrier is a special system data carrier (see "6.5. Summary of System Data Carriers") and is
included in the GAT ECO.Basic Set. This data carrier is required to change the configuration of a GL7p or to make a
new configuration of a lock that has already been configured once.
When the GL7p is in factory mode (default, unconfigured state), the APP KEY is not needed.
Once the APP KEY data carrier is loaded into MoLA, it remains valid for a certain time period. When the session
expires, the APP KEY is automatically deleted from the device. This prevents the APP KEY data carrier from being
accessed by unwanted third-party apps, malware, etc.
