GL7p - Battery-powered, door-mounted electronic locker lock GL7p
Configuration
38
HB_GL7p--EN_12
www.gantner.com
NOTE!
Min. version 3.13 of GAT Config Manager software is required to configure the GL7p.
NOTE!
The GL7p is powered by the USB cable, which means that the battery does not have to be inserted in the
lock during configuration. Ensure however that the GL7p is not de-energized for more than 1 minute (e.g., after
disconnecting the USB cable until the battery is inserted), otherwise the time and date will be erased.
Complete the following steps to configure the GL7p via GAT Config Manager.
There is a separate manual with detailed information on each function available in GAT Config Manager. To
access the manual while the soft
ware is open, click on the “Help” menu and select “How Do I”.
► After installing the software, open GAT Configuration Manager via "Start" -> "All Programs" -> "GANTNER
Electronic GmbH" -> "GAT Config Manager" -> "GAT Config Manager".
o
The default start window of GAT Config Manager is displayed.
► Click on the “Open Project” icon ("1" in Figure 5.1) to find an existing project.
► Alternatively, click on the “Create Project” icon ("2" in Figure 5.1) to start a new project.
Figure 5.1
– GAT Config Manager – Project setup
► Once a project is established, locations and sub-locations for the project can be added to the “Devices”
directory (2 in Figure 5.2) by clicking on the "Add location" button (1 in Figure 5.2).
Figure 5.2
– GAT Config Manager – Add location
1
2
1
2