background image

GAT Access 6100 Terminal Series 

 

6

 

HB_GAT-ACCESS6100--EN_14 

www.gantner.com

 

The GAT Access 6100 was developed and fabricated under the quality management standard ISO 9001 and GANTNER 
Electronic GmbH is also certified according to standard ISO 14001. 
 

This product is in conformity with the following EC directives, including all applicable amendments: 
- 2014/53/EU (Radio Equipment Directive) 
- 2011/65/EU (Restriction of the use of certain hazardous substances in electrical and electronic equipment) 
The complete text of the CE Declaration of Conformity is available via the following link: 

https://www.gantner.com/downloads-gat-access-6100_qbw3752ku8

 

 
WARNING! 

The GAT Access 6100 F PoE is a Class A device. This device can cause radio interference in the home. In this 
case, the operator may be required to take appropriate measures. 

 

 

GANTNER is committed to meeting or exceeding the requirements of the RoHS directive (2011/65/EU). The RoHS 
directive requires that manufacturers eliminate or minimize the use of lead, mercury, hexavalent chromium, 
cadmium, polybrominated biphenyls and polybrominated diphenyl ethers in electrical and electronic equipment sold 
in the EU after July 1, 2006. 

 

The WEEE symbol on GANTNER products and their packaging indicates that the corresponding material must not 
be disposed of with normal household waste. Instead such marked waste equipment must be disposed of by 
handing it over to a designated electronic waste recycling facility. Separating and recycling this waste equipment at 
the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects 
human health and the environment. Please contact your local authority for further details of your nearest electronic 
waste recycling facility. 

 

Applicable for the following devices: 
- GAT Access 6100 F 
- GAT Access 6100 F BIO 
- GAT Access 6100 F Enrollment Station 

FCC INFORMATION (U.S.A.) 

Note: 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of 
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance  with  the  instructions,  may  cause  harmful  interference  to  radio  communications.  However,  there  is  no 
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged 
to try to correct the interference by one or more of the following measures: 
- Reorient or relocate the receiving antenna. 

  - Increase the separation between the equipment and receiver. 
  - Connect the equipment into an outlet on a circuit different from that of which the receiver is connected. 
  - Consult the dealer or an experienced radio/TV technician for help. 

FCC Warning Statement: 

[Any] changes or modifications not expressly approved by the party responsible for compliance could void the user's 
authority to operate the equipment. 

 

INDUSTRY CANADA INFORMATION 

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: 
(1) This device may not cause interference; and 
(2) This device must accept any interference, including interference that may cause undesired operation of the device. 

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation 
est autorisée aux deux conditions suivantes : 
1) l’appareil ne doit pas produire de brouillage; 
2) 

l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le 

onctionnement. 

 

 

ICES Statement (Canada) 

This Class B digital apparatus complies with Canadian ICES-003. 

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada 

 

Содержание GAT ACCESS 6100




































































































Отзывы: