G&G WatchBot, Руководство пользователя

Страница: 25 / 44

25 WatchBot Home Security Camera - User Guide
3.6.3 Alarm Input Armed
If sound is enabled on the viewing PC, an audible alarm will sound and the interface light next
to the camera number which has detected movement will flash red.
3.6.4 I/O Linkage on Alarm
If checked, the alarm signal will also be sent to any other alarm systems you have connected to
the camera.
3.6.4 Setting up I/O linkage hardware
I/O PINS: (1) Output (+5V)
(2) Output
(3) Alarm input
(4)
Input (GND)
Input Pins: The input pins can be used for 1-way external sensor input. For example, you may
connect a Passive Infrared Sensor (PIR) to it for motion detection. When an external sensor
triggered, WatchBot can be programmed to send an email with picture, or control the internal
relay output. If you link an external alarm with Pin3 and Pin4, when alarm input is armed, the
external alarm is enabled.
I/O Linkage on Alarm: Pin1 will 5V when alarm is triggered, and output LOW when
alarm is released automatically.
Switch On/Off buttons control Pin1 output manually.
3.6.6 Send Alarm Notification by Mail
If checked, an email alert will be sent containing images, time and date details. (See Section
3.4 - Mail Service Settings).
3.6.7 Upload Image on Alarm
If checked, images will be uploaded by email at the allocated interval (seconds).
3.6.8 Path
This is the path the camera will save it’s videos to.
3.6.9 Scheduler
Check to enter a time schedule for when the alarm is armed or dormant. Simply click on the
calendar fields to select, and once more to deselect.
3.6.10 Save your settings
Don’t forget to click ‘Submit’ to save your settings!