G&D VISIONXS-F-DP-UHR Series, Руководство по установке и эксплуатации

Страница: 93 / 164

Installation
G&D VisionXS-F-DP-UHR · 8
English
Installing the computer module
The computer, whose signals are transmitted to the remote console, is connected to
the VisionXS-CPU computer module.
Establishing a connection to a local management network
Network: Insert a category 5 twisted pair cable (or better), which is available as acces-
sory. Connect the other end of the cable to the local network.
Connecting keyboard and mouse signals of the local computer
USB CPU: Use the
USB-AM/BM-2
cable to connect one of the computer’s USB inter-
faces to this interface.
Connecting the computer’s video output
DP CPU: Use the DP-Cable-M/M-2 cable to connect the computer’s video output to
this interface.
NOTE: All device variants of the
VisionXS
series can be operated with an
external
power supply at the
Power
interface (for desktop casings:
Main Power
).
The illustrations in this chapter show the desktop variant of the device series. This
variant is additionally equipped with an
internal
power supply (
Red. Power
).
NOTE: If desired, connect this network interface to a local network. This enables
you to access the Config Panel web application from this network and to send sys-
log messages to this network.
Pwr Main Power Red. Power Network Service Transmission 2 Transmission 1 Pwr Main Power Red. Power Service Transmission 2 Transmission 1
Line In Serial USB CPU DP CPU Line In Serial DP CPU
Line In Serial USB CPU DP CPU Line In Serial USB CPU