G&D VISIONXS-F-DP-UHR Series, Руководство по установке и эксплуатации

Страница: 138 / 164

Configuration
53 · G&D VisionXS-F-DP-UHR
Resetting the default settings
This function is used to reset the default settings of the KVM extender. By perform-
ing this function, the default settings mentioned on page 21 are reactivated.
How to reset the default settings:
NOTE: Open the local OSD of the user module by pressing the local hotkey ( default :
Alt + Num ) if you want to reset the local settings of the user module only instead of
the settings of the extender system.
OSD
1. Open the remote OSD of the computer module by pressing remote hotkey
( default : Ctrl + Num ) if you want to reset the settings of the extender system.
Open the local OSD of the user module by pressing the local hotkey ( default :
Alt + Num ) if you want to reset the local settings of the user module.
2. Select the row System setup (remote OSD) or Console utility (local OSD) and
press Enter .
3. Select the row Set system defaults and press Enter .
4. Confirm the security prompt or cancel the process.
Config
Panel
1. In the menu, click on System .
2. Click on System defaults .
3. Select the scope of the recovery:
Reset all settings
 Reset all settings of the device.
Reset only local network settings
 Reset only local network settings.
Reset only KVM application settings
 Reset all settings except the local network settings.
4. Click on
Set system defaults
.