G&D DP-MUX2-USB, Инструкция по установке и эксплуатации

Страница: 85 / 92

Configuration
G&D DP-MUX2-USB · 37
English
USB pinning
In the default settings of the KVM switch, KVM data and the data of devices con-
nected to the »USB 2.0 Devices« interface are forwarded to the computer of the
active channel.
Enable USB pinning (see page 37) if you want to permanently switch the data of
devices connected to the »USB 2.0 Devices« interface to a defined channel. The per-
manent switching of these devices (see page 13) remains the same even when
switching the KVM channel.
How to enable or disable USB pinning:
NOTE: USB pinning can be enabled or disabled in the setup menu only.
Setup m
enu
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the Arrow

or Arrow

keys to select the USB Pinning entry and press Enter .
3. Press the Space key (repeatedly) to choose between the following key-
boards:
disabled  USB pinning disabled (default)
enabled  USB pinning ensabled
4. Press the S key to save your settings.