G&D DP-MUX2-USB, Инструкция по установке и эксплуатации

Страница: 51 / 92

The KVM switch
G&D DP-MUX2-USB · 3
English
The KVM switch
The DP-MUX2-USB KVM switch enables you to operate up to two computers via
one console.
The console is provided with a USB keyboard, a USB mouse and a digital monitor.
The computers connected to the KVM switch are operated from the installed console.
The switching between computers takes place either via the pushbuttons on the
front panel, configurable key combinations, or a serial device which is connected to
the
RS232
port.
The front panel of the device provides two USB 2.0 interfaces to operate any USB
devices. The connected USB devices are available to whichever active computer.
After enabling the USB hold function (see page 37), the USB devices can be perma-
nently switched to a defined computer (see page 13). The switching of the USB
devices remains the same when switching the KVM channel.
Package Contents

1 ×
DP-MUX2-USB
KVM switch

1 × data cable (
Update-Cable-2
)

1 × power cable

1 × »Installation and Operation« manual
NOTE: The KVM switch emulates keyboard and mouse on each channel and
hence guarantees error-free booting at all times.
NOTE: The devices of the
DP-MUX
series are optionally available as desktop or as
rackmount variant. Rackmount variants should be installed to the rack with the
front panel facing forwards.
NOTE: Every computer you want to connect requires one KVM cable set:

standard variant: A6100164
(2 metres) or
A6100165
(5 metres)

MC2 variant: A6100166 (2 metres) or A6100167 (5 metres)