G&D DP-MUX2-USB, Инструкция по установке и эксплуатации

Страница: 60 / 92

Switching
12 · G&D DP-MUX2-USB
Switching commands
The following commands are provided for switching the channel:
Messages
The KVM switch confirms the successful execution of a command and otherwise
sends a meassage.
Command Channel
1! 1
2! 2
<! switch to previous channel
>! switch to next channel
ADVICE:
Use the » ?! « command to show the currently accessing channel.
NOTE:
The serial device carries out the command directly after it is sent.
A message (see below) informs the serial device concerning the success or failure
of the switching of channels.
Message Meaning
In [x] All switching to channel [x] successful
E01 invalid channel number (out of range)
E06 channel switching failed
E10 invalid command
E13 invalid value (out of range)