SUPPORTS - pag. SU 15
Lockable rotating instrument carrying tray
ATTENTION:
For a correct and safe usage of the rotating tray with COMPACT it is necessary to
read carefully the text contained in sections “INFORMATION” (from pag. IN 1) and
“BODY” (from pag. BO 1) of the usage instructions.
The rotating instrument carrying tray must be placed in the special space on the
body of the trolley (see lay-out on page SU 1).
This accessory cannot be installed if the holding frame is assembled on the trolley
(pag. SU 4)
Failure to observe the prescriptions and the procedures described in this
document absolves the manufacturer of any responsibility for damages to things
or people.
Function
This accessory shall be used
as a support for defibrillators or
monitors.
Features
This accessory is equipped
with an anti-sliding pad. The
central pivot is pre-set to insert
1 fixed I.V. pole (pag. SU 2)
into the central hole (a).
Dimensions: 380x310 mm.
Assembly
1
Remove the lid from one side of the
surface.
2
Insert the flanged pivot into the hole.
3
Rotate the base of the support until the
holes coincide. Screw up the shorter screw
(M6 x 16) by means of the special
wrencher.
4
Insert the stainless steel ring following
the dx or sx indications (see next step).
continua
a
