SUPPORTS - pag. SU 12
5
Tighten up the screw by means of the
special wrench (the nut must be fixed from
the inside).
6
Repeat steps 3-5 for the fixing screws
on the lower part of the plate.
7
Fix the oxygen bottle holder with 2
cross screws.
Usage
ATTENTION
Use exclusively SMALL or LARGE oxygen bottles.
The oxygen bottles shall be equipped with all necessary declarations (that
guarantee a reduced risk of fire or explosion).
Do not exceed the maximum loading weight of 15 kg.
1
Unfasten the fixing belt.
2
Place the oxygen bottle.
3
Adjust the fixing belt according to the oxygen bottle
diameter for higher safety.
4
Fasten the belt.
5
Remove the oxygen bottle after unfastening the belt.
Note:
Use the double belt if the oxygen bottle is taller.
Removal
Follow the procedure described for assembly in reverse order.
Maintenance
Refer to what is reported on pag. IN 12.
Decommissioning and disposal
Refer to what is reported on pag. IN 14.
