1
2
3
4
5
6
7
8
Set Point
Set Point
Supply 1
Supply 2
Display
Select
Display
Select
arrow shows
bottom key is active
Options:
- 9600
- 4800
- 2400
- 1200
- 300
press to cycle
through options
5.
When you reach the desired option, press
ENTER
to save your selection.
SET CLOCK
You can set the time and date of the clock. The values must be stepped through one at a time:
hours, minutes, day, and date. For each value, the current data is displayed along with a flashing
sign. Press
ENTER
to accept these values, or use the backspace (
←
) and numerical keys to key
in a new value and then press
ENTER
.
1.
Press the
Menu
key to cycle through the menu until you reach CONFIG.
2.
Press
ENTER
to step to the submenu and press the Menu key to cycle to SET
CLOCK.
NOTE: When you press ENTER in step 3 the display will momentarily flash the battery status.
3.
Press
ENTER
. The bottom display shows the hour setting followed by a flashing
sign to indicate that you may enter the desired hour (0-23) using the backspace and
numerical keys.
4.
Press
ENTER
to save the hour value. The bottom display now shows the current
minute setting.
1
2
3
4
5
6
7
8
Set Point
Set Point
Supply 2
Supply 1
1
2
3
4
5
6
7
8
Set Point
Set Point
Supply 2
Supply 1
5.
Use the backspace and numerical keys to enter the minute value (0-59).
6.
Press
ENTER
to save the minute value. The bottom display now shows the current
day setting.
7.
Key in the day: 1 through 7 where Sunday=1, Monday =2, and so on. Press
ENTER
to save.
8.
You can now set the correct date:
8.1.
Key in the day of the month and press
ENTER
to save.
8.2.
Key in the month and press
ENTER
to save.
8.3.
Key in the year and press
ENTER
to save.
9.
Press the top
Display Select
key (YES) to save changes, or the bottom
Display Select
(NO) to exit without saving changes.
Digitel MPC Manual
Page 35 of 72