Galvanic Applied Sciences 962-AGX, Руководство по эксплуатации

Страница: 38 / 100

Revision 1 38 9/10/2019
When all desired changes have been made, select
Save
. Selecting
Revert
will keep the
parameter values that were used before the start of the editing process.
a) H2S Span - This parameter specifies the span factor utilized for the H
2
S concentration
display and output. This value should always be close to 1.0.
Any deviation of the H
2
S span parameter will impact the output calibration
of the analyzer.
b)
Cell Length
- Indicates the cell length of the measuring cell.
c)
Fixed Temperature
- To select
Fixed Temperature,
navigate to the
Fixed Temperature
on/off field using the Field Next button on the keypad. Use the Enter key to toggle the x
on and off in this field. If the x is present, the analyzer will use the temperature indicated
here when calculating the concentration of the H
2
S. If the x is not present, the analyzer
will use the live value for cell temperature when calculating the concentration of the H
2
S.
d)
Fixed Pressure
- To select
Fixed Pressure
navigate to the
Fixed Pressure on/off
field
using the
Field Next
button on the keypad. Use the
Enter
key to toggle the x on and off in
this field. If the x is present, the analyzer will use the pressure indicated here when
calculating the concentration of the H
2
S. If the x is not present, the analyzer will use the
live value for cell pressure when calculating the concentration of the H
2
S.
4.8.3 Display
The Display sub-panel (Figure 4-11) is used to set the X and Y range for the display on the
Analysis 1
and
Analysis 2
panels.