
EN - 70
EN
Paper bags
May cause a
fire in the oven.
Plastic foam
Plastic foam may melt or contaminate the liquid inside when
exposed to high temperature.
Wood
Wood will dry out when used in the mw oven and may split
or crack.
VII. DESCRIPTION
技术要求:
1.印刷内容要求清晰、无毛边。
2.颜色:黑色+白色。
3.此资料为贴片印刷资料,其它要求请按工程图纸。
型号:20UX47-L
A1
A2
A3
A4
A5
A6
A7
B
A
C
C1
C8
C2
C6
C5
C7
C4
C3
A – Microwave oven
A1
– Ventilation holes
A2
– Door
A3
– Door sealing
A4
– Door latches
A5
– Safety glass
A6
– Plate shaft
A7
– Circular base
B – Glass plate
C
– Control panel
C1 – Display
C2
– Start / + 60
sec. / Confirm
C3
– Stop / Cancel
C4 – Clock / Defrosting
C5 – Automatic programs
C6 – To set values (regulatory knob)
C7 – Microwave output
C8 – Express function Quick
VIII. INSTALLATION, ELECTRICAL CONNECTION
1.
Remove all packaging material, remove the accessory. Remove all adhesive foils,
stickers or paper from the appliance. Place the turning table on the turning circle
in the middle of the oven.
2.
Place the MW oven on a desired firm and flat surface (e.g. kitchen desk or a specially
designed stand for MW ovens) at the height of at least 85 cm and out of reach of
children. The glass of the door could heat up to a very high temperature. Leave space
above, behind and next to the oven for proper ventilation. Openings in the appliance
provide airflow during ventilation and must not be covered or blocked. Also, the feet of
the oven must not be removed. Covering the openings or removing the feet may cause
damage to the MW oven.