background image

 

ADP 4100 Printer 

1.  Place the Unit inside an appropriately sized plastic bag. 

2.  Place the Unit onto the bottom piece of foam pad.   

3.  Wrap the narrow foam pad sleeve around the base of the Unit, 

enclosing the wheels of the Unit and consequently the bottom 
foam pad. 

4.  Place the top piece of foam padding onto the Unit. 

5.  Slide the wrapped Unit into the open side of the shipping 

container. 

6.  Enter the RA # on the packing list and on the outside of the 

container in at least two locations for easy identification at 
Unimark. 

7.  Shipping label to include return address as well as “ship to”. 

8.  Notify your “carrier of choice” for pick-up and delivery to Unimark. 

Technical Support 

As a purchaser or Unimark authorized third party maintainer of 
Unimark products, you have the added benefit of technical assistance 
in the installation, diagnosis and use of Unimark products. 

Just call our toll free number (800 451-2926) and allow the auto-
attendant to guide you to our technical support line.  A technical 
support analyst will assist you.  

To better serve you, please have the product in question on-line and 
ready to test prior to calling technical support. In addition, have the 
following information available: 

y

 Model 

Number/description 

y

 Serial 

Number 

y

 Failure 

message/code/description 

Unimark operates two service support centers.  Select the office 
closest to you from the Unimark Contacts web page 
(www.unimark.com).  The customer support telephone number and e-
mail address are listed for your convenience. 

ADP 4100 Printer 

Installation and Operators Manual

, April 2007 

37 

Содержание ADP 4100



















































Отзывы: